Safe and Cost effective
Environmentally Advanced Solutions
in Laboratory Enclosure Design
Environmentally Advanced Solutions
in Laboratory Enclosure Design
Dealer area
Home
>
Equipment
Standard and optional equipment and accessories
 |
Control panel : Flow monitor This device monitors the air flow and warns the user through a visual and audible alarm in case of fan failure. Programmable Timer This timer counts down the running hours of the unit and informs the user every 60 hours of use about the necessity to perform a saturation detection test of the molecular filter (in compliance with the AFNOR NF X 15- 211: 2009 standard requirements) |
|
|
|
 |
Sampling port It allows taking an air sample from the detection chamber in the filtration module in order to check the molecular filter saturation level, with the help of colour coded tubes (not supplied). |
|
|
|
 |
Internal lighting 18 Watts - 500 Lux - IP68. Compact tubular fluorescent lighting. From 1 to 3 tubes according to models. |
 |
Air Flow meter It controls permanently the air face velocity which must be between 0.4 and 0.6 m/s (in compliance with the AFNOR NF X 15- 211: 2009 standard requirements) |
|
|
|
 |
Energy ports Located on the enclosure side panels, they allow the passage of power cables/ fluid pipes in the enclosure without discomfort for the user. |
|
|
|
 |
Chemical Listing : List of approved chemicals This booklet contains an exhaustive list of chemicals, certified by Erlab®, that can be handled into the filtering fume hood in the conditions described in the AFNOR NF X 15- 211: 2009 standard. About 700 chemicals are described including for each one: its name, its formula, its CAS number, its boiling point, its molecular weight, its saturation vapour pressure. This booklet also indicates the filter best adapted for each chemical capture and its retention capacity, the type of filter saturation detection system, the maximum quantity of the chemical that can be introduced within the enclosure and the name of the test laboratory having performed the test linked to the chemical handling. |
|
|
|
 |
Molecode S
Large spectrum filter saturation detection alarm (Requirement for class 1 of the AFNOR NF X 15-211 : 2009 standard) 1 cell located in the detection chamber allows for the automatic detection of filter saturation by solvents. 1 cell in contact with the laboratory environment indicates ambient air pollution levels. |
|
|
|
 |
Mobicap™ Metallic mobile rolling cart equipped with 4 wheels (2 locking wheels). Allows the safe relocation of a captair Flex™ unit. *only available on Captair® SD 321 and Captair® SD 391 models |
|
|
|
 |
Benchcap™ Metallic fixed work bench. Equipped with two height adjusting jacks. |
|
|
|
 |
Shelf Metallic adjustable sliding shelf for Mobicap™ and Benchcap™ |
|
|
|
 |
Tempered glass work surface With rounded edges for arm rest and a comfortable working position |
|
|
|
 |
Phenolic resin work surface Work surface with built-in retention tray, made of phenolic resin, with ergonomic edges for arm rest and a comfortable working position. High chemical and mechanical resistance. Ideal for accurate weighing operations.. |
|
|
|
 |
Back panel access door Metallic. Located on the enclosure back panel, allows for an easy rear access to heavy and bulky instrumentations. Ideal for maintenance operations. (Only available on Captair® Flex™ XL models) |
|
|
|
 |
Transparent back panel Made of acrylic. Offers a 360 degree visibility in the enclosure and optimizes natural lighting. |
|
|
|
| Particulate Pre-filter 40 % filtration efficiency for particles > 0.3 μm |
|
  |
Fire Foe™ is a revolutionary Automatic Fire Extinguisher Fire Foe™ tubes use heat sensitive nylon tubing together with a patented sealing system to contain and release the Envirogel® extinguishing agent.
When a fire begins and heat builds in the hood to above 175° F the tube automatically starts to activate.
Fire Foe™ reacts to all fires, slow burning over time as well as instant flash fires. At 316° F the tube discharges instantly, the gas portion of the agent immediately interrupts the combustion process.
It physically absorbs the heat and chemically extinguishes the fire. The non-toxic, non-corrosive, powder element travels with the gas and coats the combustible material to prevent re-ignition.
Fire Foe™ is quick and easy to install with the supplied brackets and requires no power connections or external sensors.
• Superior fire-kill compared to halon replacements
• Environmentally responsible, Non-Toxic, Non-Corrosive
• Self contained, simple, compact, no power or batteries
• UL, SNAP approved and EPA certified
|
SERVICES
Direct access to our other websites
Discover the erlab group, world leader in laboratory filtration technologies since 1968.
Real time communicating fume hoods equipped with the new Neutrodine® filtration technology.
For multi-disciplinary handlings
For multi-disciplinary handlings
- Filters: High performance super activated carbon molecular filters for the filtration of air polluted by toxic gases compatible with all brands.
- Maintenance: The first international network of approved technicians for the maintenance of super activated carbon laboratory filtration systems of all brands.
- Maintenance: The first international network of approved technicians for the maintenance of super activated carbon laboratory filtration systems of all brands.
© Copyright 2010 Erlab. All rights reserved.
Legal mentions |
General sales conditions |
Site map |
Choose your language