N°1 in ductless mobile enclosures
and vented chemical storage cabinets
for the total filtration of toxic gases
 
Dealer area

my Erlab.com
Home > Products > Ductless filtering fumehoods > Equipment
Equipment
 
logo captairFlex

Equipment

Standard and optional equipment and accessories
 


 
 
Standard equipment
 
  Control panel :
Flow monitor
This device monitors the air flow and warns the user through a visual and audible alarm in case of fan failure.
Programmable Timer
This timer counts down the running hours of the unit and informs the user every 60 hours of use about the necessity to perform a saturation detection test of the molecular filter (in compliance with the AFNOR NF X 15- 211: 2009 standard requirements)
 Top 

  Sampling port
It allows taking an air sample from the detection chamber in the filtration module in order to check the molecular filter saturation level, with the help of colour coded tubes (not supplied).
 Top 

 
Internal lighting
18 Watts - 500 Lux - IP67. Compact tubular fluorescent lighting. From 1 to 3 tubes according to models.



 
  Air Flow meter
It controls permanently the air face velocity which must be between 0.4 and 0.6 m/s (in compliance with the AFNOR NF X 15- 211: 2009 standard requirements)

  
 
  Energy ports
Located on the enclosure side panels, they allow the passage of power cables/ fluid pipes in the enclosure without discomfort for the user.

  
 
  Chemical Listing : List of approved chemicals
This booklet contains an exhaustive list of chemicals, certified by Erlab®, that can be handled into the filtering fume hood in the conditions described in the AFNOR NF X 15- 211: 2009 standard.
About 700 chemicals are described including for each one: its name, its formula, its CAS number, its boiling point, its molecular weight, its saturation vapour pressure. This booklet also indicates the filter best adapted for each chemical capture and its retention capacity, the type of filter saturation detection system, the maximum quantity of the chemical that can be introduced within the enclosure and the name of the test laboratory having performed the test linked to the chemical handling.

 

 
Optional equipment
 
 
Molecode S
Large spectrum filter saturation detection alarm
(Requirement for class 1 of the AFNOR NF X 15-211 : 2009 standard)
1 cell located in the detection chamber allows for the automatic detection of filter saturation by solvents.
1 cell in contact with the laboratory environment indicates ambient air pollution levels.

 
  Mobicap™
Metallic mobile rolling cart equipped with 4 wheels (2 locking wheels).
Allows the safe relocation of a captair Flex™ unit.
*only available on Captair® SD 321 and Captair® SD 391 models
 
  Top

 
  Benchcap™
Metallic fixed work bench.
Equipped with two height adjusting jacks.
 

  
 
  Shelf
Metallic adjustable sliding shelf for Mobicap™ and Benchcap™

  
 
Tempered glass work surface
and metallic spill tray with rounded edges for arm rest and a comfortable working position
  Top

 
Phenolic resin work surface
Work surface with built-in retention tray, made of phenolic resin, with ergonomic edges for arm rest and a comfortable working position. High chemical and mechanical resistance. Ideal for accurate weighing operations..

 
Back panel access door
Metallic. Located on the enclosure back panel, allows for an easy rear access to heavy and bulky instrumentations. Ideal for maintenance operations.
(Only available on Captair® Flex™ XL models)

  
 
Transparent back panel
Made of acrylic. Offers a 360 degree visibility in the enclosure and optimizes natural lighting.

  
 
  Particular Pre-filter
40 % filtration efficiency for particles > 0,3 μm




 
   
 
 
SERVICES
Un programme de sécurité
Valiquest
Asura
 
Direct access to our other websites
 
© Copyright 2010 Erlab. All rights reserved.    Legal mentions | General sales conditions | Site map | Choose your language